CaPRC shortrange clinic Saturday July 24th

Short Action Precision · Thu Jul 22, 2010 12:21 pm

Sons of bitches, that is on my needs list. Anyone have one that I could use for the day?

264Charlie · Post by **264Charlie** » Thu Jul 22, 2010 2:55 pm

Iloveguns wrote:Sons of bitches, that is on my needs list. Anyone have one that I could use for the day?

What ends. I should be vale to cover you

Short Action Precision · Thu Jul 22, 2010 3:17 pm

Its an AI chassis. Does that help? Sorry I will try to google it.

Post by **AR15barrels** » Thu Jul 22, 2010 3:20 pm

AICS takes HK hooks.

Short Action Precision · Thu Jul 22, 2010 3:26 pm

Thanks just found that out also.

khw9mm · Post by **khw9mm** » Thu Jul 22, 2010 3:52 pm

Thanks for the sling reminder. Got a TIS and need to learn how to use it properly... ;)

aermotor · Post by **aermotor** » Thu Jul 22, 2010 11:29 pm

Got my extractor fixed, gonna try and at least make it out to say hi for a little bit.

Random Q: Does anyone have a M1A Standard they might bring so I can check it out?

robert hode · Post by **robert hode** » Fri Jul 23, 2010 5:28 am

aermotor wrote:Got my extractor fixed, gonna try and at least make it out to say hi for a little bit.

Random Q: Does anyone have a M1A Standard they might bring so I can check it out?

I've got an M1 Garand 30-06 you can try. Not what you're looking for but close.

DirtRacer151 · Post by **DirtRacer151** » Fri Jul 23, 2010 5:31 am

robert hode wrote:
I've got an M1 Garand 30-06 you can try. Not what you're looking for but close.

Would a Socom16 work?

aermotor · Post by **aermotor** » Fri Jul 23, 2010 9:22 am

Do you have a delicious Socom 16 James?

DirtRacer151 · Post by **DirtRacer151** » Fri Jul 23, 2010 9:44 am

aermotor wrote:Do you have a delicious Socom 16 James?

By delicious do you mean pimped out tacticool? I've been tempted in the past but I can't bring myself to do it. Its got the extended magazine release made by Sadlak, the SEI bolt release, and a scout front sight since the Socoms factory sight covers a whole target frame at 100yds. If I had to buy one again I'd get the scout.

The Socom had extraction issues 6 of 10rds when I first got it. Springfields warranty service is awesome even though it was disappointing that I had to use it. They replaced the entire bolt and re-headspaced the barrel. I also got a new stock because I was unhappy with the finish on the original. It hasn't ever missed a beat since I got it back from them.

Post by **Gnzrme** » Fri Jul 23, 2010 10:32 am

Oh, this is going to turn into bring all your other guns that you have to shoot afterwards.....between just a few of us, we woulde have to bring out a 18 wheeler trailer filled with racks....

aermotor · Post by **aermotor** » Fri Jul 23, 2010 10:37 am

Haha nice, too bad you had all those issues at the start. I either want the Standard or Scout in the wood stock, nice and simple. Don't worry about bringing it for now, still trying to see if I can make it at all.

DirtRacer151 · Post by **DirtRacer151** » Fri Jul 23, 2010 10:39 am

Gnzrme wrote:Oh, this is going to turn into bring all your other guns that you have to shoot afterwards.....between just a few of us, we woulde have to bring out a 18 wheeler trailer filled with racks....

Now that sounds like a hell of a good time! Any of you guys got some RAWs we can shoot after?

DirtRacer151 · Post by **DirtRacer151** » Fri Jul 23, 2010 10:40 am

aermotor wrote:Haha nice, too bad you had all those issues at the start. I either want the Standard or Scout in the wood stock, nice and simple. Don't worry about bringing it for now, still trying to see if I can make it at all.

K... let me know

264Charlie · Post by **264Charlie** » Fri Jul 23, 2010 11:26 am

Sorry I don't have a sling with HK hooks.

Short Action Precision · Fri Jul 23, 2010 11:51 am

No worries. Ill make do.

Chris · Post by **Chris** » Fri Jul 23, 2010 1:14 pm

Looks like I will have to back out. I am having a ring issue that I can't fix right now and I would need to leave at 12:00 anyhow.

Post by **Gnzrme** » Fri Jul 23, 2010 1:29 pm

Sorry to hear that Hill Billy

Post by **Gnzrme** » Fri Jul 23, 2010 1:32 pm

Ok, off to the store to get the stuff for the Bomb Digity potato salad, 10#'s worth of potatoes.....

jrr · Post by **jrr** » Fri Jul 23, 2010 2:04 pm

Still room? I joined you guys for a shoot out in the desert a few months back and had a great time. I'd like to head out tomorrow if there is still room on the line.

DirtRacer151 · Post by **DirtRacer151** » Fri Jul 23, 2010 3:13 pm

jrr wrote:Still room? I joined you guys for a shoot out in the desert a few months back and had a great time. I'd like to head out tomorrow if there is still room on the line.

We had a few people cancel today so there's room. See ya out there tomorrow and welcome to the site.

linkpimp · Post by **linkpimp** » Fri Jul 23, 2010 3:18 pm

aermotor wrote:
Random Q: Does anyone have a M1A Standard they might bring so I can check it out?

Hey Zach I got one, but I'm sorry I wont be shooting this weekend.. I'll bring it with me to our next shoot if you still want to check one out..

Connor P Price · Post by **Connor P Price** » Sat Jul 24, 2010 6:23 pm

I'm still pissed I had to miss this one but I'm looking forward to hearing how everything went. So how'd it go guys?

DJDace · Post by **DJDace** » Sat Jul 24, 2010 6:54 pm

It was a lot of fun. I arrived late to the party due to my appointment with my Doctor, but I wasn't to far behind by the time I got there. I got my rifle re-zero'd, shot some poker chips and then some paper @ 200 and 300 yards. After that was transitions and positional and it was a great learning experience!

Thanks for all the help guys, it was a lot of fun.

khw9mm · Post by **khw9mm** » Sat Jul 24, 2010 8:14 pm

Missed on some good times Connor! You gotta come out next time!! Improved on my technique and got to know my rifle a little more, overall a great session!

Thanks to Randall, Henry, James, Charlie and Stephen for all the help and tips! ;)

Post by **AR15barrels** » Sat Jul 24, 2010 9:01 pm

hill billy wrote:Looks like I will have to back out. I am having a ring issue that I can't fix right now and I would need to leave at 12:00 anyhow.

Is that a problem with the contents of the ring?

Post by **Gnzrme** » Sat Jul 24, 2010 10:11 pm

Good day today guys....Always fun...One thing I noticed is that there were zero safety issue....That is always good to see....We started out with the correct position behind the gun and dry firing then off to zero. Everybody was able to get zeroed. Some people had elevation/windage adjustments that were as wide as 1 MOA per click

. Well, run what you brung so you better get good at holdovers

Once we got zeroed, everybody moved out to 200 yards and then 300 yards....Nathan's 175's out of his AICS managed to snap the littleman target frame in 2

. Still think those loads are going faster than 2458 :o . Then it was out to 300 yards...Dope was established and then everybody moved over to the little man steel...Charles and I were running the 1st four shooters and they were just nailing the little men at 300 yards....excellent job...then it was a break for the BBQ...thanks Charlie for cooking

Potato salad did not turn out as good as it did last time, sorry about that guys....then we moved into sitting positions...the proper position was demonstrated but as some people found out, you may have to adapt from that.... ;). Everybody did well and hope to see everybody out at the next one...Did everybody see the banner hanging off the rafters on the line....Looked good!!!

Overall, an excellent day...Finished up around 3pm

linkpimp · Post by **linkpimp** » Sat Jul 24, 2010 10:23 pm

Hey... Sounds like a fun time.. I'm sorry I missed it..

Connor P Price · Post by **Connor P Price** » Sat Jul 24, 2010 10:35 pm

Glad to hear everything went well for you guys out there today. Iloveguns- I hope the sling worked out well for you, one of these days I'll have to learn to use it effectively myself :lol:

.

Short Action Precision · Sat Jul 24, 2010 11:11 pm

Thank you so much for letting me use it. Hopefully one day I will learn how to use it myself also!! Thanks again guys for putting this on. I know some of the groups we were shooting are not that spectacular compared to what you guys are shooting. But they feel good to us new guys. I know it would have taken a lot longer to get just to this point without all your guys help. Still a long ways to go but it should be a fun process!

robert hode · Post by **robert hode** » Sun Jul 25, 2010 5:55 am

Thanks to all the staff that ran the match. I had fun and learned alot. Good shootin, good food, good company. Can't ask for more!

Chris · Post by **Chris** » Sun Jul 25, 2010 9:59 am

AR15barrels wrote:
Is that a problem with the contents of the ring?

LOL. Nope. These crappy Warne rings I have are allowing my scope to move around (Forward 1/4") and I have no other rings that will fit.Glen promised me new rings this week and I'm not shooting this gun anymore until I get them, I really don't want to damage my scope.

Post by **AR15barrels** » Sun Jul 25, 2010 11:07 am

hill billy wrote:LOL. Nope. These crappy Warne rings I have are allowing my scope to move around (Forward 1/4") and I have no other rings that will fit.Glen promised me new rings this week and I'm not shooting this gun anymore until I get them, I really don't want to damage my scope.

My advice to you is not to wait for Glen as it could be quite a long time.
Buy something else in the mean time.

DirtRacer151 · Post by **DirtRacer151** » Sun Jul 25, 2010 1:24 pm

AR15barrels wrote:
My advice to you is not to wait for Glen as it could be quite a long time.
Buy something else in the mean time.

Yep, i was waiting for months for my Seekins in 34mm high. It got to the point of shoot or wait and Charlie had some Badgers to let me borrow. They worked perfect and i ended up buying them from him and have never looked back. I do like the seekins but you'll be waiting longer then a week just as i did. Get some rings that work and get out and shoot!!

Chris · Post by **Chris** » Sun Jul 25, 2010 1:44 pm

I've been waiting four months or so. Glen gave me his word. If I don't have them Friday I'll be getting something else.

Post by **AR15barrels** » Sun Jul 25, 2010 2:00 pm

hill billy wrote:I've been waiting four months or so. Glen gave me his word. If I don't have them Friday I'll be getting something else.

He gave me his word a year ago on a base and rings.
I finally got it a couple months ago.

264Charlie · Post by **264Charlie** » Sun Jul 25, 2010 5:04 pm

I had a good time and hope to see some of the new guys at some matches...

Chris · Post by **Chris** » Sun Jul 25, 2010 5:59 pm

AR15barrels wrote:
He gave me his word a year ago on a base and rings.
I finally got it a couple months ago.

I hear you. I plan to be at the Sept. practice. Heck, I have the whole week of Aug 23rd to 28th planned out for five different range trips.

wildcard · Post by **wildcard** » Mon Jul 26, 2010 8:44 am

Do the Warne Tactical Rings suck? I got two new sets waiting to be used..

I new favorite rings are the Badger Max50 ALLOY rings. Certainly not cheap though..

Post by **AR15barrels** » Mon Jul 26, 2010 9:09 am

wildcard wrote:Do the Warne Tactical Rings suck?

I have had very good results with Warne and will continue to use them.
They support the shooting sports in a very big way.

Post by **Jeff361** » Thu Aug 12, 2010 6:19 pm

Randall.... when will you be doing something like this again?

Post by **Gnzrme** » Thu Aug 12, 2010 6:41 pm

We do this every 3 months if I am correct....next one should be in October.....

DirtRacer151 · Post by **DirtRacer151** » Thu Aug 12, 2010 6:44 pm

Gnzrme wrote:We do this every 3 months if I am correct....next one should be in October.....

The next short range clinic will be October. The long range clinic is in a week and a half

Post by **Jeff361** » Wed Aug 18, 2010 8:12 pm

I want to confirm that the next course of fire "C" will be held on October 25th.... as I understand it... this is the course of fire best suited to new shooters... where we can learn to get a solid 100YD zero and also begin gathering our dope out to longer distances..... am I correct?

Thanks..

Post by **Jeff361** » Wed Aug 18, 2010 8:13 pm

oooops meant to say September 25th according to the posted schedule...

DirtRacer151 · Post by **DirtRacer151** » Wed Aug 18, 2010 9:34 pm

Jeff361 wrote:I want to confirm that the next course of fire "C" will be held on October 25th.... as I understand it... this is the course of fire best suited to new shooters... where we can learn to get a solid 100YD zero and also begin gathering our dope out to longer distances..... am I correct?

Thanks..

You are correct but you should watch for the announcements in case something changes.