Bore guides?

MichaelV · Post by **MichaelV** » Fri Dec 10, 2010 12:24 pm

Hey who uses bore guides to clean their bolt guns?

DirtRacer151 · Post by **DirtRacer151** » Fri Dec 10, 2010 1:07 pm

MichaelV wrote:Hey who uses bore guides to clean their bolt guns?

I do

dreka · Post by **dreka** » Fri Dec 10, 2010 1:26 pm

I'm using them as well.

Juice5610 · Post by **Juice5610** » Fri Dec 10, 2010 1:31 pm

264Charlie · Post by **264Charlie** » Fri Dec 10, 2010 3:35 pm

I do when I use a rod but mostly just use a bore snake with brass removed.

MichaelV · Post by **MichaelV** » Fri Dec 10, 2010 8:57 pm

DirtRacer151 wrote: I do

Who makes it?

DirtRacer151 · Post by **DirtRacer151** » Fri Dec 10, 2010 9:09 pm

MichaelV wrote:
Who makes it?

Idk ...is probably a dewey. Its pretty simple but it does the job.

jwpark · Post by **jwpark** » Sat Dec 11, 2010 2:21 am

Mike Lucas bore guide

http://www.6mmbr.com/catalog/item/1433308/954882.htm

MichaelV · Post by **MichaelV** » Sat Dec 11, 2010 1:55 pm

Thanks guys for your input!

buggsb · Post by **buggsb** » Tue Dec 14, 2010 1:29 pm

Always...I use a Dewey

anothervr6kid · Post by **anothervr6kid** » Thu Dec 30, 2010 7:54 pm

jwpark wrote:Mike Lucas bore guide

http://www.6mmbr.com/catalog/item/1433308/954882.htm

I just ordered this one.

buggsb · Post by **buggsb** » Mon Apr 25, 2011 3:17 pm

Always...Dewey.

buffybuster · Post by **buffybuster** » Mon Apr 25, 2011 4:15 pm

You're suppose to clean?

bcrich · Post by **bcrich** » Mon Apr 25, 2011 4:20 pm

Stoney Point guide rod with a dewey rod and a parker hale jag, when I'm not using wipe out.

Post by **AR15barrels** » Mon Apr 25, 2011 4:23 pm

I made my own.

264Charlie · Post by **264Charlie** » Mon Apr 25, 2011 5:14 pm

AR15barrels wrote:I made my own.

Yeah yeah... The closest thing I have to a lathe is a hand drill and a chisel.

Post by **AR15barrels** » Mon Apr 25, 2011 9:10 pm

264Charlie wrote:
Yeah yeah... The closest thing I have to a lathe is a hand drill and a chisel.

My first lathe work was done with a 1/2" black and decker power drill and a file.

DirtRacer151 · Post by **DirtRacer151** » Mon Apr 25, 2011 9:32 pm

AR15barrels wrote:
My first lathe work was done with a 1/2" black and decker power drill and a file.

I do mine with a Craftsman drill press and a file

Post by **AR15barrels** » Mon Apr 25, 2011 10:37 pm

DirtRacer151 wrote:I do mine with a Craftsman drill press and a file

want a trick?
get an x-y table.
Mount a vise to it
put a real lathe tool in the vise

you can do amazing lathe work in a drill press when you need to...

DirtRacer151 · Post by **DirtRacer151** » Mon Apr 25, 2011 10:39 pm

AR15barrels wrote:
want a trick?
get an x-y table.
Mount a vise to it
put a real lathe tool in the vise

you can do amazing lathe work in a drill press when you need to...

Have an X-Y table but its crappy. Need to get a nice one but too cheap :lol:

NotoriousPDL · Post by **NotoriousPDL** » Tue Apr 26, 2011 7:35 am

jwpark wrote:Mike Lucas bore guide

http://www.6mmbr.com/catalog/item/1433308/954882.htm

+1 Just got mine in the mail. The guy is real good to deal with...

Bore guides?

Bore guides?

Re: Bore guides?

Re: Bore guides?

Re: Bore guides?

Re: Bore guides?

Re: Bore guides?

Re: Bore guides?

Re: Bore guides?

Re: Bore guides?

Re: Bore guides?

Re: Bore guides?

Re: Bore guides?

Re: Bore guides?

Re: Bore guides?

Re: Bore guides?

Re: Bore guides?

Re: Bore guides?

Re: Bore guides?

Re: Bore guides?

Re: Bore guides?

Re: Bore guides?