CaPRC training day Sunday April 25th

[MercilessMike]

I don't why it is, but here I am stuck in LA at work... I should be done by 3 AM... that means no shooting for me until later. I think I'm just going to hit Piru later in the day. :x

[DirtRacer151]

Last minute approval but I will be there tomorrow... Curtis if you don't want to lead us up, I can do it...Ben can ride up with me from the meeting spot in Newhall..

If you lead the way then I wont have to meet everyone off the offramp. Let me know if that's what your gonna do so I know for sure wether or not to wait. Thanks

[Gnzrme]

I will still need you to wait at the off ramp since I havent been to the spot for 3 months....Sorry

[DirtRacer151]

I will still need you to wait at the off ramp since I havent been to the spot for 3 months....Sorry

OK no problem. Give me a call when you guys are leaving newhall.
(951)236-6579

James

[badtrout]

last minute thing nixes my plan to go.... should be hitting the next one though... have fun guys

[Gnzrme]

Ok everybody....will be at the Park n Ride across from Douglas Furniture on Newhall Avenue (Formerly San Fernando Road) in Newhall CA at 0745 and will depart promptly at 0800 to head out to the Spot....If anybody is lost or late you may call me at 661 993 7886 Cell...Will take about 1 hour to arrive to the Spot....

[rksimple]

Awesome group today of 13 shooters. Hope everyone had a good time. Bob-thanks for bringing that extra steel. That orange paint worked very well. And Ben-your new rifle shows lots of promise. With some good match ammo it'll be scary accurate...not that there was ever a doubt. Randall can flat build rifles.

Charlie and James-you guys keep up the practice and keep dry firing, and you'll kick all our asses in Sacto. Excellent shooting.

[Connor P Price]

So while i was packing everything up somehow I didn't think it would be a good idea to take my midway mat home with me. I'm hoping somebody grabbed it for me and I can pick it up sometime?

[AR15barrels]

So while i was packing everything up somehow I didn't think it would be a good idea to take my midway mat home with me. I'm hoping somebody grabbed it for me and I can pick it up sometime?

I have it.

[264Charlie]

Randall & Ryan really put a lot of work into the event and it continues to get better and better. A lot of "Randall Guns" on the line now days:) One day he will be booked eight mounts out and not have time for us.

Thanks everyone for a safe fun event.

[264Charlie]

I have it.

Ok what did I forget?

[AR15barrels]

Ok what did I forget?

You forgot to bring the shade.
I'm all sunburned.

The ranger really needs to be aligned and have the tires balanced.
Maybe drop a turbo or a v8 into it at the same time...

[rksimple]

The ranger really needs to be aligned and have the tires balanced.

After how you were driving on that road, its no wonder. I'm surprised it held together. Not bad for 200 bucks.

[Connor P Price]

I have it.

Awesome, thanks. I'll find a way to pick it up so your not stuck with it forever.

[Gnzrme]

had a good time....couldn't get my shit together today and was missing alot of shots....need more practice....I will blame it on the crushed ammo from running over it....Yeah, thats it....

Anyway, how do you post up photo's.....

[Connor P Price]

Crushed ammo is a new excuse. I'm sticking with my sucking at shooting excuse, I figure that will last a while.

[DirtRacer151]

You forgot to bring the shade.
I'm all sunburned.

Me too! I truly look redneck now!!

The ranger really needs to be aligned and have the tires balanced.
Maybe drop a turbo or a v8 into it at the same time...

I can build you a sick long travel kit for that thing ;)

[DirtRacer151]

OK a few questions.

What would be a typical (i know this is just an estimate) muzzle velocity increase with and additional 20deg to heat up the ammo? Is there a rule of thumb to follow for muzzle velocity increases as temps come up? I was shooting .3 high at 1K with my dope from last month, .3 at 850, .2 at 650, and .1 at 500. I know that the 1000ft higher DA from today has something to do with it but JBM is only knocking it down .1 at 1k from the DA change.

Does anyone know what the look angle is when shooting out to 1k?

Charlie, can you run my load again in QL for me and increase the powder temp 20deg?

[AR15barrels]

Does anyone know what the look angle is when shooting out to 1k?

It's uphill, but not a lot.
Maybe 10-15 degrees.

[DirtRacer151]

It's uphill, but not a lot.
Maybe 10-15 degrees.

Just asking for future shooting. It actually knocks me another .1 at 1k when i increase it to 10 deg. on JBM.

I know that it was the same last month so that wouldn't be the solution but this is something that has come of interest to me after spending time with my 22lr last week at the range and wondering why i was missing at 200. I changed my dope to reflect the 8-9 degree look angle and sure enough it changed my dope .2 at that distance and it matched my hard dope perfectly

[maddesign]

Randall, Ryan,
thanks for setting this up, I had a lot of fun, totally new experience for me!!
And if I forgot someone, thank you too!!

sonny

[AR15barrels]

Randall, Ryan,
thanks for setting this up, I had a lot of fun, totally new experience for me!!
And if I forgot someone, thank you too!!

sonny

You gotta build yourself a dope card.
Rear this thread: http://www.caprc.com/forums/viewtopic.php?f=11&t=37

[264Charlie]

OK a few questions.

What would be a typical (i know this is just an estimate) muzzle velocity increase with and additional 20deg to heat up the ammo? Is there a rule of thumb to follow for muzzle velocity increases as temps come up? I was shooting .3 high at 1K with my dope from last month, .3 at 850, .2 at 650, and .1 at 500. I know that the 1000ft higher DA from today has something to do with it but JBM is only knocking it down .1 at 1k from the DA change.

Does anyone know what the look angle is when shooting out to 1k?

Charlie, can you run my load again in QL for me and increase the powder temp 20deg?

25 fps increase per QL.

[DirtRacer151]

Thanks... dope matches now.

[quote="264Charlie]
25 fps increase per QL.[/quote]

[khw9mm]

Had a great time out there yesterday. Thanks Randall and Ryan for setting this up and thanks to Charlie and Conner for letting me get behind your rifles. Hope to join you guys again next month with my 700.

Hey Ben, keep me posted if the other guy doesn't take your .308 SMK's.

Thanks again guys!
Kevin

[oni]

Thanks for a great time. I had a blast and thanks for putting up with a PR newb like me.

[cabzguy]

Randall, Ryan thanks for a great Job! Charlie thanks for the coaching & sling, Steven & Randall thanks for the "brass reading"
All in all a great bunch see you all again for sure!