Page 1 of 1

Tannerite

Posted: Mon Aug 02, 2010 9:41 am
by Gnzrme
Ok, so I am up in Big Bear and we went shooting yesterday...bought 45 plastic golf balls from wally world and taped up all the holes in them and left one hole....Filled to the top with tannerite (if you do not know what that is, google it) and then taped over...laid out on the range and shot at with 223 and 308....I did get an explosion, but I was very disappointed in the force/sound....I ended up shooting a half pound just to see what I would get and that seemed more like what I recall...I mixed up a half pound and placed about 1/2 or 1/4 of a pound in the back of a standard clay and taped that up and that got a flash, but not alot of noise....I followed the mixing instructions correctly...1 scoop of accelerant to the powder and mixed well....Did I get a bum batch or should I have packed the scoop tighter...maybe it wasnt enough accelerant....

Suggestions....Yes, I do have one video of the half pound, but give me a while to figure out how to post it plus wireless is so-so up here...

Re: Tannerite

Posted: Mon Aug 02, 2010 10:42 am
by Short Action Precision
I would think that the 1/2# canisters are more air tight then taping up a clay. I think that might make it noisier then the tape. When I was a kid we used to make black powder charges in toilet paper tubes and taped them shut. They were fun but we learned to get better results with tupper wear!

Re: Tannerite

Posted: Mon Aug 02, 2010 11:21 am
by Gnzrme
Iloveguns wrote:I would think that the 1/2# canisters are more air tight then taping up a clay. I think that might make it noisier then the tape. When I was a kid we used to make black powder charges in toilet paper tubes and taped them shut. They were fun but we learned to get better results with tupper wear!
Nathan, I thought about getting some black powder and making something out of that, but I wasn't sure if it would explode with a FMJBT bullet....Plus not to mention the fire danger up here..... :o

Re: Tannerite

Posted: Mon Aug 02, 2010 11:47 am
by Short Action Precision
Gnzrme wrote:
Nathan, I thought about getting some black powder and making something out of that, but I wasn't sure if it would explode with a FMJBT bullet....Plus not to mention the fire danger up here..... :o
LOL. Might want to put it into a metal tin. Or using tracers!! But defiantly a fire hazard. We wouldnt shoot the ones we made as kids we put fuses in them and ran like hell. Biggest one we did was a full pound of black powder in a 2 inch pvc pipe. That was some fun times!!!

Re: Tannerite

Posted: Mon Aug 02, 2010 5:08 pm
by Gnzrme
You do that now and you end up on Git'mo and being water boarded until you confess that your a terroist :lol:

Re: Tannerite

Posted: Tue Nov 16, 2010 6:04 pm
by chuckshoots
You might want to make sure you mix it very thoroughly? When I use it its always in the 1/4lb or 1/2lb containers it comes in whatever size they are, and it always make a big 'ol boom. I guess it could be possible you have a faulty batch.

I have never put it in another container though except for a gallon milk jug(which was awesome).

Re: Tannerite

Posted: Sat Nov 27, 2010 10:05 pm
by Chris
chuckshoots wrote:You might want to make sure you mix it very thoroughly? When I use it its always in the 1/4lb or 1/2lb containers it comes in whatever size they are, and it always make a big 'ol boom. I guess it could be possible you have a faulty batch.

I have never put it in another container though except for a gallon milk jug(which was awesome).
We were shooting 14lb cans of the stuff today. Amazing what that will do to large metal pieces of desert trash. :D

Re: Tannerite

Posted: Sat Nov 27, 2010 10:19 pm
by Gnzrme
did you pack it tight into the container or just loose....Still waiting for video's....

Re: Tannerite

Posted: Sun Nov 28, 2010 7:43 pm
by Chris
Gnzrme wrote:did you pack it tight into the container or just loose....Still waiting for video's....
The videos just got sent to me. I'm working on it. We just put it in loose.

Re: Tannerite

Posted: Tue Dec 07, 2010 9:31 pm
by Gnzrme
Hey Chris...Did you get these video's up yet...?

Re: Tannerite

Posted: Tue Dec 07, 2010 9:34 pm
by Chris
Gnzrme wrote:Hey Chris...Did you get these video's up yet...?
Here's the best one and the only one I bothered to put on youtube. The item at the top right is a 33" or so tire that blew about 200 ft. Doesn't look like much but that's about 50lbs of crap on top.

http://www.youtube.com/watch?v=qy2LnKvHMTM" onclick="window.open(this.href);return false;

Re: Tannerite

Posted: Tue Dec 07, 2010 10:05 pm
by Gnzrme
doesnt last very long when you are setting off 100# charges :lol: 14#'s didnt make a big bang....

Re: Tannerite

Posted: Fri Dec 17, 2010 4:14 pm
by MichaelV
Steve, a full pound is the only way to go.

Re: Tannerite

Posted: Fri Dec 17, 2010 4:16 pm
by Chris
Gnzrme wrote:doesnt last very long when you are setting off 100# charges :lol: 14#'s didnt make a big bang....
Dave tells me he is going to set off some 50 pounders on his way back from SHOT.