Considering Mcree or an AICS

but I have never been behind both, so what are the pros and cons
and if possible, if any members can be willingly to let me get behind a Mcree/AICS would be much appreciated

Come to a match and get behind everything.

I'll be at Angeles on Sat morning! Left side of the range.
AX chassis if you want to try it.

I had a Mcrees, sold it and bought 3 Manners T4-As (mini-chassis).

RS is another chasis option to think about. If you are set on a chasis.

i like my manners t5 its the best of both worlds where you have a pistol grip type stock but you can also wrap your thumb up over it like a t4 or a McMillan stock

I need something with adjustable LOP
because my LOP is freakishly 15" man....

Exodus343 wrote:I need something with adjustable LOP
because my LOP is freakishly 15" man....

You don't NEED adjustable.
Just order it with a 14" LOP and make spacers.
Spacers can be installed into ANY stock with a recoil pad.

My Manners with the butt spacers is 14.5" so you inly need one more. You can specify that when you order.

sounds like a good option

the B&C M40 stock's recoil pad is glued on, how do I add spacers?

I have a manners with adjustable butt spacers up for sale or trade for less then it costs from manners. Its still brand new.

Exodus343 wrote:sounds like a good option

the B&C M40 stock's recoil pad is glued on, how do I add spacers?

Cut it off and then attach the new pad and spacers with screws like manners and mcmillan...

Exodus343 wrote: the B&C M40 stock's recoil pad is glued on, how do I add spacers?

You can either cut it off or I've been able to get them off with a heatgun and patience. Add some weight to the buttstock while you're at it.