Burro or Angeles this Saturday 1/8/11

[pklin1297]

Hello all,

I am itching to run out and finally shoot my new Howa for the first time, and with my hand loaded ammo. Planning to go to Burro Canyon this Saturday since I haven't been there in ages. Does anyone know if they might be closed due to storm damage like Lytle Creek and West End? I have sent an email and will be calling them later to see, but just wondering if anyone knew off hand.

If Burro is not available I plan on going to Angeles which I believe is open since another shooter I know was just there about two Sundays ago.

Is anyone going to either of these ranges this Saturday? I would love to meet some CAPRC members, and get some shooting tips.

I plan to check out Burro first at 9 AM when they open, if not available then I'll head to Angeles and get there probably around 10 AM from Azusa.

Peter

[pklin1297]

Just got response back from Burro that they will be open this Saturday from 9 AM - 4 PM, so I will be going there.

[Seth8541]

Hello all,

I am itching to run out and finally shoot my new Howa for the first time, and with my hand loaded ammo. Planning to go to Burro Canyon this Saturday since I haven't been there in ages. Does anyone know if they might be closed due to storm damage like Lytle Creek and West End? I have sent an email and will be calling them later to see, but just wondering if anyone knew off hand.

If Burro is not available I plan on going to Angeles which I believe is open since another shooter I know was just there about two Sundays ago.

Is anyone going to either of these ranges this Saturday? I would love to meet some CAPRC members, and get some shooting tips.

I plan to check out Burro first at 9 AM when they open, if not available then I'll head to Angeles and get there probably around 10 AM from Azusa.

Peter

As of right now Ill be at Angeles on Saturday. Gotta get some ammo loaded up. Id be more than happy to give you some pointers. Hopefully we'll see you out there.
Anyone else want to link up on Saturday at Angeles?

Seth

[roypark]

I'll be at Angeles on Saturday as well. I'll be the guy that is trying to figure out why I need to learn how to shoot side prone.

[jwpark]

Kewl, I'll be at ASR Saturday too. I'll be there probably starting at 9:30am.

[Seth8541]

I'll be at Angeles on Saturday as well. I'll be the guy that is trying to figure out why I need to learn how to shoot side prone.

Yeah, I know how you feel. I may just get some side prone dopes as well . Might as well just get it out the way so I can practice something useful.

[maddesign]

I plan on being there Sat am too.

sonny

[oni]

Just got response back from Burro that they will be open this Saturday from 9 AM - 4 PM, so I will be going there.

Peter you may want to head over to Angeles instead. Sounds like there will be a good size group there and plenty of people to pick their brains and help you out.

Unfortunatly I have Honey-do's in the morning but may get out in the afternoon to check zero before Sundays match.

[AR15barrels]

There will not be any side prone at sunday's match.

[DirtRacer151]

There will not be any side prone at sunday's match.

Or will there???!!! Dun dun dunnnnnn 8-)

[Juice5610]

I will most likely be at Angeles on Saturday as well, confirming zero and getting used to my new stock.

[Teletiger7]

The burro range doesn't go out very far. I would suggest Angeles. Atleast you can get your dope out to 600.

[pklin1297]

Well, I guess I'll have to look into going out to Angeles...

I'll be shooting my first bolt rifle for the first time, so everything I do will be elementary, but it'll be great to hang with you guys. I have shot bolt action rifles before, just not mine.

I've never been to Angeles but I assume I should go to the concrete benches section? Anything I should know before going out there?

[Juice5610]

Well, I guess I'll have to look into going out to Angeles...

I'll be shooting my first bolt rifle for the first time, so everything I do will be elementary, but it'll be great to hang with you guys. I have shot bolt action rifles before, just not mine.

I've never been to Angeles but I assume I should go to the concrete benches section? Anything I should know before going out there?

Bring eye protection as it as mandatory. DO NOT cross the yellow line during a line break and bring a couple extra bucks cuz their hot link hot dogs are pretty damn good lol

[Juice5610]

Oh and bring a shooting mat/movers blanket.

[pklin1297]

Oh and bring a shooting mat/movers blanket.

Neither of which I have... Knew I should have picked up the Midway special shooting mat.

I'll have the other usual shooting gear.

[jwpark]

You can pick up a movers blanket at a hardware store like Home Depot

Jay

[maddesign]

You can pick up a movers blanket at a hardware store like Home Depot

Jay

get the tacticool camo one at Harbor Freight it's around $10 bucks!!

[Seth8541]

Well, I guess I'll have to look into going out to Angeles...

I'll be shooting my first bolt rifle for the first time, so everything I do will be elementary, but it'll be great to hang with you guys. I have shot bolt action rifles before, just not mine.

I've never been to Angeles but I assume I should go to the concrete benches section? Anything I should know before going out there?

We'll be shooting on the far left side of the rifle firing line. See you out there.

[pklin1297]

Thanks guys, will see you out there barring any mishaps before then.

I'll run to Harbor Freight tonight to see if I can find the tacticool mover's blanket.

[GforceJunkie]

Home Depot has precut 3'x5' carpet rugs for $13 that work pretty nice as well.

[pklin1297]

Thanks GforceJunkie. I found the tacticool camo mover's blanket at Harbor freight tonight ($11.99, 72"x80"), so I'll be using that this Saturday to give prone shooting a try.

[AR15barrels]

Would someone please take a tape measure to the range tomorrow?
I need to know about how much space there is between each shooting bench top at the front of the bench as well as how tall the benches are.
I need these dimensions asap on saturday to make a prop for sunday.
If you could call me from the range in the morning, that would be even better!

[Juice5610]

Would someone please take a tape measure to the range tomorrow?
I need to know about how much space there is between each shooting bench top at the front of the bench as well as how tall the benches are.
I need these dimensions asap on saturday to make a prop for sunday.
If you could call me from the range in the morning, that would be even better!

Barricades eh?

[Gnzrme]

lets give him smaller dimensions..... ;)

[AR15barrels]

lets give him smaller dimensions..... ;)

Good idea.
Make the barricades smaller so they are even LESS stable.
Let me know how that works out for you...

[Gnzrme]

no I was going to make them smaller so I could see around them.....

[AR15barrels]

Barricades eh?

I just realized your avatar tells me half of what I need to know if you tell me how wide your shooting mat is...

[AR15barrels]

no I was going to make them smaller so I could see around them.....

hey, if you don't want the support, you can just stand there without them.

[pklin1297]

I'll bring the tape measure. Randall what's your number?

[Gobig]

Anybody interested in going to Angeles on Sunday, the 9th?

[Connor P Price]

Anybody interested in going to Angeles on Sunday, the 9th?

There will be just shy of 30 of us at Angeles on Sunday as we are hosting a match. We'll be on the far left hand side of the rifle firing line, come check it out!

[pklin1297]

Hello all,

I got there around 9:20 this morning, and all concrete bench lanes were taken!

I am sorry I didn't get to meet the people who were there, except for David (don't know handle name here) whom I met around 2 PM after I got done at the black benches on the other side. Great meeting you Dave, hope you get the NF knob adjustment question answered!

Also have to apologize to Randall, who sent me a message regarding measuring the benches after I volunteered to do so, but I didn't check messages between last night and this morning when I left so I completely missed it. Sorry Randall, I am usually a lot more responsible than this...

On a better note, my first ever visit to Angeles shooting range was a great one. Of all the trips I've taken to West End and Lytle Creek, I can't remember a time where there was no wind under 10 - 15 miles/hour, most of the time more, but at Angeles today it was calm and very pleasant; I think I have found a favorite range.

My new Howa and USO combo shot well for me. My first bolt action rifle, first .308, and first rifle scope combo... I have plenty more work to do to catch up to you all, but I am happy with the results today and encouraged; this gun has potential and I believe it will perform better if and when I do my part (cliche I know). I will post groups in the rifle section where it is supposed to be.

I will try to make it to clinic A in about two weeks. Lots to learn from you all.

[Juice5610]

I just realized your avatar tells me half of what I need to know if you tell me how wide your shooting mat is...

Just seeing this now brother it is 36" wide and 79" long

[Gobig]

There will be just shy of 30 of us at Angeles on Sunday as we are hosting a match. We'll be on the far left hand side of the rifle firing line, come check it out!

I'll be there! I'll be wearing a coyote brown hat with the American Flag on the front/black pants and shooting a POF 308.

[brian01tj]

Maybe this means no new barricade for this match. Kinda good, kinda bad

[AR15barrels]

Maybe this means no new barricade for this match. Kinda good, kinda bad

There's no barricade, but we got something else new.
Ask james to explain.

[brian01tj]

There's no barricade, but we got something else new.
Ask james to explain.

Grrrreat

[brian01tj]

There's no barricade, but we got something else new.
Ask james to explain.

The club had enough money to rent a copter? Sweet !!!!!!