You do that now and you end up on Git'mo and being water boarded until you confess that your a terroist
http://www.caprc.com/forums/ |
|
| Tannerite http://www.caprc.com/forums/viewtopic.php?f=47&t=718 |
Page 1 of 1 |
| Author: | Gnzrme [ Mon Aug 02, 2010 9:41 am ] |
| Post subject: | Tannerite |
Ok, so I am up in Big Bear and we went shooting yesterday...bought 45 plastic golf balls from wally world and taped up all the holes in them and left one hole....Filled to the top with tannerite (if you do not know what that is, google it) and then taped over...laid out on the range and shot at with 223 and 308....I did get an explosion, but I was very disappointed in the force/sound....I ended up shooting a half pound just to see what I would get and that seemed more like what I recall...I mixed up a half pound and placed about 1/2 or 1/4 of a pound in the back of a standard clay and taped that up and that got a flash, but not alot of noise....I followed the mixing instructions correctly...1 scoop of accelerant to the powder and mixed well....Did I get a bum batch or should I have packed the scoop tighter...maybe it wasnt enough accelerant.... Suggestions....Yes, I do have one video of the half pound, but give me a while to figure out how to post it plus wireless is so-so up here... |
|
| Author: | Short Action Precision [ Mon Aug 02, 2010 10:42 am ] |
| Post subject: | Re: Tannerite |
I would think that the 1/2# canisters are more air tight then taping up a clay. I think that might make it noisier then the tape. When I was a kid we used to make black powder charges in toilet paper tubes and taped them shut. They were fun but we learned to get better results with tupper wear! |
|
| Author: | Gnzrme [ Mon Aug 02, 2010 11:21 am ] |
| Post subject: | Re: Tannerite |
| Author: | Short Action Precision [ Mon Aug 02, 2010 11:47 am ] |
| Post subject: | Re: Tannerite |
| Author: | Gnzrme [ Mon Aug 02, 2010 5:08 pm ] |
| Post subject: | Re: Tannerite |
You do that now and you end up on Git'mo and being water boarded until you confess that your a terroist
|
|
| Author: | chuckshoots [ Tue Nov 16, 2010 6:04 pm ] |
| Post subject: | Re: Tannerite |
You might want to make sure you mix it very thoroughly? When I use it its always in the 1/4lb or 1/2lb containers it comes in whatever size they are, and it always make a big 'ol boom. I guess it could be possible you have a faulty batch. I have never put it in another container though except for a gallon milk jug(which was awesome). |
|
| Author: | Chris [ Sat Nov 27, 2010 10:05 pm ] |
| Post subject: | Re: Tannerite |
| Author: | Gnzrme [ Sat Nov 27, 2010 10:19 pm ] |
| Post subject: | Re: Tannerite |
did you pack it tight into the container or just loose....Still waiting for video's.... |
|
| Author: | Chris [ Sun Nov 28, 2010 7:43 pm ] |
| Post subject: | Re: Tannerite |
| Author: | Gnzrme [ Tue Dec 07, 2010 9:31 pm ] |
| Post subject: | Re: Tannerite |
Hey Chris...Did you get these video's up yet...? |
|
| Author: | Chris [ Tue Dec 07, 2010 9:34 pm ] |
| Post subject: | Re: Tannerite |
| Author: | Gnzrme [ Tue Dec 07, 2010 10:05 pm ] |
| Post subject: | Re: Tannerite |
doesnt last very long when you are setting off 100# charges 14#'s didnt make a big bang....
|
|
| Author: | MichaelV [ Fri Dec 17, 2010 4:14 pm ] |
| Post subject: | Re: Tannerite |
Steve, a full pound is the only way to go. |
|
| Author: | Chris [ Fri Dec 17, 2010 4:16 pm ] |
| Post subject: | Re: Tannerite |
| Page 1 of 1 | All times are UTC - 8 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|