Come on out and join us at Angeles for the 2nd part of our new precision rifle shooter series of clinics on Sunday April 26th.
This shoot will have you gathering dope from a 100yd zero out to 600yds as well as work on spotting and calling shots and making corrections from calls.
We will be continuing with using the features of the scope and how to make accurate soft dope from your hard dope using ballistics software.
You need to have attended (as a shooter) one of our former "A" clinics in order to attend this clinic as a shooter.
We will limit this to 20 shooters so that those shooters can get maximum range time.
Fees are $75 for non members or $50 for club members.
The entry fee covers the classroom sessions, cold drinks and BBQ lunch and your use of the range for the rest of the day after the clinic is over.
Plan on a full day as the schedule has us shooting until at least 3pm.
You may participate as a non-shooter, observe the shooting portion of the day and join us for the BBQ for a reduced $25 non-shooter fee.



Tentative schedule as follows:
7:15 Sign-in
7:30 Classroom session on the firing line.
8:15 line goes hot. verify, correct and zero knobs at 100yds (5-10 rds)
10:00 open shooting time with instruction as needed
12:00 BBQ lunch break
1:00 open shooting time with instruction as needed

Some things to bring:
Precision bolt rifle wearing a scope with target knobs, eye/ear protection, sunscreen, chamber flag, 80 rounds of match quality ammo, printout from a ballistics program showing your bullet drop in moa or mils as appropriate to your scope, shooting mat or blanket, bipod, some kind of rear bag or sand sock, small notepad and a pencil or pen to take notes.
Bring what you have, don't worry too much about what you don't have.
We always make do with what we have.

This is a Precision Rifle event so if the gun/scope/ammo is not capable of shooting 1moa groups, it will detract from your overall experience at the shoot.
Please have your rifle zeroed at 100yds and your knobs set to zero before you arrive on the day of the shoot.
We will verify a correct zero at the shoot, but it takes time that is better spent putting rounds on targets.

We are also looking for our experienced club members to show up and help instruct.
If you are able to help on the line, please RSVP anytime.

RSVP's for CaPRC club member shooters will be accepted after 12 noon on Friday 4/3/15.
RSVP's for non club member shooters will be accepted after 12 noon on Friday 4/10/15.
Any RSVP's posted before those times will be ignored or deleted.

The following people will work the line:
AR15barrels
Robojet
Treadstone
oni
postal
Tackman11
nevertipsy
Capnjon
gau17
thegiff
glenn_ma

The following people have acceptably RSVP'd as shooters:
92E2
b1gdave32
Hollywood_Shooter
warpspeed
Brian308
hj_s14
Deeooo
Mudlol
GEEKMEDIC
elcajon
trailtundra
djbiggs
bosko
EBR Works
Lornev
mintis

Waiting list is here:

_________________
God shoots a Remington 700, drives a Chevy Truck and carries a Glock 19.
I don't do any of those things.

Just booked my hotel for this class. Trying to get my re-loads dialed in so that I can shoot them at the class and get some good dope. Definitely looking forward to this one

_________________
“The most deadly thing on a battlefield is one well-aimed shot.” — Sgt. Carlos Hathcock

Robojet and Treadstone can help

Please delete this account.

I'll be there

IN to shoot....

Site clock not Daylight Savings Time adjusted...

_________________
"Democracy is two wolves and a lamb deciding what to have for dinner.
Liberty is a well armed lamb with a SAC Alpha 11 protesting that decision." Unknown 2017

I'll be there...

I will be there

I'll be there.

I will be there

I will be there

I will be there

Please delete this account.

I will be there

_________________
“The most deadly thing on a battlefield is one well-aimed shot.” — Sgt. Carlos Hathcock

I will be there

Put me down for helping

I will be there

If Brad is grilling again.... Def in to help...

That is some GOOD FOOD!!!!!!

I will be there


Sent from my iPhone using Tapatalk

I will help.

_________________
“The most deadly thing on a battlefield is one well-aimed shot.” — Sgt. Carlos Hathcock

I will be there.

I will help out

I will help

I will help

I'll be there to shoot.

In to eat

LOL!!!! ^^^^

I will be there!!

Just wanted to throw this out there for some of the beginners that are reloading, I highly suggest you complete load development if you haven't already before attending this clinic, it will maximize your benefit from this clinic. If you are using factory match ammo, disregard my comment ^_^

I'm afraid I have to cancel, Randall. Looks like I have to be out of town that weekend.

In to help

_________________
Tomorrow's Battle Is Won During Today's Practice!

_________________
“The most deadly thing on a battlefield is one well-aimed shot.” — Sgt. Carlos Hathcock

I'll be there to shoot. I did the "A" clinic last year. Now I have a more appropriate rifle.
Looking forward to Brad's BBQ!

_________________
EBR Works
FFL07/02 SOT

I'm in to shoot...


Sent from my iPhone using Tapatalk

_________________
"Democracy is two wolves and a lamb deciding what to have for dinner.
Liberty is a well armed lamb with a SAC Alpha 11 protesting that decision." Unknown 2017

_________________
EBR Works
FFL07/02 SOT

_________________
Kevin H.

3 more spots left.

_________________
God shoots a Remington 700, drives a Chevy Truck and carries a Glock 19.
I don't do any of those things.

Too bad I wasn't able to attend clinic A, otherwise I'd attend this one.

Also, I keep reading people using 43.x gr of varget or 4064 for 175 smk. What brass are we talking about here? I am new to this, but with PPU brass, I was having pressure signs even at 41.5 4064, br2, 2.81 coal out of a factory 700. And where do you get your varget? I have a hard time finding it.

My sweet spot seems to be @ 44.3gr of Varget. No signs of pressure at all. I am loading 175gr SMK's. I am still working on seating depth. 2.865 is .0010 off the lands. I have 10 loaded at 2.860, 2.865, and 2.870 to see what groups the best.

_________________
“The most deadly thing on a battlefield is one well-aimed shot.” — Sgt. Carlos Hathcock

_________________
Kevin H.

I just got some Lapua brass and am hoping to find some varget soon so I'll work up a load. What primers and brass are most of you using?

I used black hills (winchester) brass with no issues.. Usually CCI or win primers. I was in the high 42. grains varget.

Win Brass, CCI LR Primers, 175 SMK, 44.5g Varget with no pressure signs. Recently did a test @ 44.8 and still no significant pressure issues

_________________
"Democracy is two wolves and a lamb deciding what to have for dinner.
Liberty is a well armed lamb with a SAC Alpha 11 protesting that decision." Unknown 2017

For those still looking for VARGET, there is a guy on CALGUNS that just listed (15) 1# jugs of Varget @ $35/pound -or- $33/pound if you buy 5. Not the best price, but it will get you started if you're in need for the Clinic.

Link:


ETA: His location is listed as the San Fernando Valley

_________________
"Democracy is two wolves and a lamb deciding what to have for dinner.
Liberty is a well armed lamb with a SAC Alpha 11 protesting that decision." Unknown 2017

write "mintis" on that list

_________________
TELL ME WHO YOUR FRIENDS ARE AND I WILL TELL YOU MINE

Something came up last minute and I don't think I'll be able to make it to this Clinic B. Hopefully you guys will be able to have another one in the near future. Wish I could make it. Please free up my spot for anyone else that wants to attend...