Long Range Rifle Match 08-23-15 North County San Diego, CA.

Any scoped bolt action or semi-auto rifle. Calibers from .223 up to and including .338.
All targets will be shot from the prone position (if you are physically handicapped you may use a bench) from a covered firing line, any front and rear rest. Distances will vary from one hundred to eight hundred eighty five yards, paper and steel targets, forty rounds maximum for the match.

There will be a short sight in period prior to the match and the range will be open for practice for NSCA/HP members and guest until about 4:00 after the match.

No pre-registration required, just show up before 8:00 am. Sight in period 8:45 am. Match starts promptly at 9:00am.

See our new web site for details:
http://www.ncsahighpower.com/
http://www.ncsahighpower.com/guidelines.html

Also check this page for ammunition restrictions:
http://www.ncsahighpower.com/ammo.asp

If you need some practice with distances over passed 600yds as well as with wind calls this is a pretty good match. I'll be there.

I'm new to long range shooting, only have about 100rds through my rifle and never been to a match. I would like to start shooting some matches. Could I come out and just watch too see how it runs?


Sent from my iPhone using Tapatalk

Derek...both Phil and I will be there. Look for a tall and a not so tall guy. If you get there between 7 and 7:30 you should be in good shape.

See ya then!

Ok sounds fun what is the round count that you guys normally shoot in a match


Sent from my iPhone using Tapatalk

They provide you time to get a good zero before it starts, so have at least 40 for the match plus what you want to shoot before or after the match.

What would the match fees be $30 for non member?


Sent from my iPhone using Tapatalk

I know its $20 for Military, but rates are on the NCSA Pala site

Hey guys thx for all the help out there this weekend. Had a blast. Wish I did a little better but what can I ask for, I have never shot out passed 200yrd.

What was the gun smiths and and contact info to get my barrel threaded for a brake and bottom metal inlaid in the stock.


Sent from my iPhone using Tapatalk

Contact Randall (AR15Barrels)