Hey guys, well the time has come and we are in the process of finally building a mover for future PBR and SCPRT matches. We (SCPRT) have taken it upon ourselves to get this ball rolling which includes funding this project %100 ourselves to make it happen. We are already into it more money then had hoped to spend. Currently we've got $700 in it and we're guessing by the time tracks, frame, and armor are finished it will be close to $1000 cost.

We have a functioning mock up now and it's got adjustable speed control on it. We haven't clocked it yet but the speed should be adjustable from 0-5mph. In its current form it's able to support the weight of a 175lb man riding on it. It still needs some tidying up of wires and whatnot but that will come as it takes more shape.

I would like to ask of anyone who currently participates, has participated in the past, plans to participate in the future, in any WEGC PBR match, that you would be willing to help us in the home stretch with final costs to get this thing finished. If you're willing to donate some money to the cause so that we can finally have a mover to shoot at in SoCal then please contact myself, Rich Chronister, or Rich Gonzalez. Anything helps guys. Remember up til this point we've funded the entire thing off of SCPRT.

Thanks guys!!

Here's our breakdown so far-

Motor and Motor Driver $375
Electronics to control motor driver (Microcontroller, relays, sensors, etc) $51.13
2 12V Batteries $103.56
4 Vtrack Wheels $64.48
4 Bearings w/Hubs $44.72
2 Sprockets $43.31
Chain and Chain Link $17.22

Grand total= $699.42.

I'm in for $100. Step up ladies!

Give me the address to send the check.

_________________
In the face of a crisis, a failure to act is the first act of failure.
There are no stupid questions, just stupid people asking questions.
Sweat saves blood, blood saves lives, but brains saves both.

Contributed/Donated

_________________
BENEFACTOR MEMBER

We really appreciate it guys. After this is completed we have plans to build a smaller cable driven mover for paper stages. The cost on that will be MUCH cheaper.


Donations can be sent to myself at JJEFFRIES308@YAHOO.COM or to Rich C at rich91316@gmail.com

Paypal?

PayPal'd you James. Can't wait for this mover to kick my ass!

I'm in for a Benji. Will send to you paypal when I get back from Hong Kong.


Sent from my iPhone using Tapatalk

_________________
Kevin H.

Done. Can't wait to shoot it.

_________________
In the face of a crisis, a failure to act is the first act of failure.
There are no stupid questions, just stupid people asking questions.
Sweat saves blood, blood saves lives, but brains saves both.

Thanks for all the support guys.
Brandon made a video just to show you guys. This isn't a dream...it's going to happen!!!

Just a thought.... If you put the axles underneath and cut a slot for the chain you would get more ground clearance. If you use angle iron for the tracks on rocky ground it might help. Probably don't need to but just throwing it out there.

James,
$100.00 from peerless,
An address to send to?

_________________

"One of the secrets to mastery in any field is to forever be a student."

I'll donate 100$

PP sent. Thanks guys!


Sent from my iPhone using Tapatalk

_________________
Kevin H.

Hey guys, thanks again to everyone who is helping with this project.

Does anyone have a line on someone with a sheet of AR500? The place we usually get it from is out of stock and they want us to purchase a full sheet just to get the armor front plate for this thing.
Anyone have a local lead?

How big of a piece you need. I'll see if my guy has any he can hook up

^^^he'll check tomorrow

Got yo shit!
.

You're the man Ben!!